Mercer International logo representing oil water separator services and technology in Albany, NY. design center

Electrical Utilities: Coal

Reliable Oil & Solids Separation for Coal Handling, Conveyance & Powerhouse Operations

Mercer delivers enhanced-gravity separation systems engineered for coal-fired power stations where oily runoff, coal fines, ash, and abrasive solids overwhelm traditional CPI tanks, pits, and slotted-pipe skimmers.

request a free site audit
Blue oil water separator skid with stair access platforms at an industrial plant

INDUSTRY INSIGHT

Overview

Coal-fired power plants generate oily wastewater across a wide range of drainage points: conveyor lubrication systems, crusher house washdowns, turbine hall lube-oil, equipment bays, ash handling areas, fuel-oil backup systems, and stormwater from expansive coal pile surfaces. These flows are highly variable and often heavily loaded with coal fines, grit, rust, and suspended solids.

Yet many facilities still rely on CPI tanks, corrugated packs, or concrete pits originally built decades ago. When coal fines and ash enter these structures, they clog plate packs, blind flow passages, bury skim trenches, and destabilize the water column. Oil quickly mixes with solids, collapses, sinks, and turns into a persistent sludge layer that can remain untouched until a full outage or  compliance problems hit the outfall.

Mercer breaks that pattern.

Multi-Pack™ coalescer systems and Compliance Master™ separators deliver stable, automated performance in solids-heavy, high-variability coal environments. With automated oil removal, timed solids purging cycles, sealed covers, and abrasion-resistant construction, Mercer systems ensure predictable separation and fewer cleanouts, restoring compliance confidence for coal handling and power generation facilities.

Request a Consultation
Separator bays with plate covered tops and lifting eyes at a power plant

Challenges

Common Coal Plant Challenges

Coal Fines, Fly Ash & Abrasive Solids

Coal dust, particulate, and bottom ash instantly blind CPI and plate packs, choke slotted pipes, and cause immediate media fouling in legacy units.

Heavy, Viscous, and “Dirty” Oil Layers

Oil contaminated with fines becomes dense and sinks quickly. Once sunken, it forms a compacted sludge layer that CPI systems cannot evacuate.

Stormwater Surge Loads

Coal pile runoff, containment drainage, and seasonal storms overwhelm old separators and drive hydrocarbon breakthrough.

Fuel-Oil Handling & Backup Generation

#2 Fuel-oil and turbine/generator lube-oil introduce variable viscosity and solids contamination that outdated facilities cannot predictably separate.

Aging Concrete Pits & Skim Trenches

Decades-old pits suffer from uneven floors, corroded weirs, broken skimmers, and chronic solids burial.

VOC/Odor Exposure from Open Basins

Decades-old pits suffer from uneven floors, corroded weirs, broken skimmers, and chronic solids burial.

Solution

Mercer’s Solution

Mercer brings stable, repeatable, and automated separation performance to coal plants by controlling flow geometry, managing solids, and preventing the oil collapse that plagues traditional systems.

Covered oil water separator with yellow handrails at a coal-handling plant

Mercer’s enhanced-gravity separators maintain rise paths and prevent blinding even when loaded with coal fines, ash, and grit.

Electromechanical skimming removes floating oils before fines can weigh them down, preventing sinking and sludge accumulation.

Automated hopper-bottom purge valves evacuate solids before they interfere with separation, eliminating the need for manual pit cleanouts.

Controlled velocities preserve separation during washdowns, storm events, and fuel-oil system maintenance cycles.

Airtight lids keep coal dust, debris, and VOCs contained, protecting operators and ensuring stable hydraulics.

Coatings and materials are selected to handle continuous exposure to abrasive solids and corrosive plant conditions.

Pair of tiered white separator units installed outside a brick powerhouse

APPLICATION AREAS

Typical Coal Applications

Natural gas power generation facility with electrical equipment and Mercer oil-water separation system application.

Conveyor & Crusher House Drainage

Treat lubrication leakage, washdown water, and coal fines without media fouling.

Gas turbine internals and coalescer modules for oil-water separation in natural gas power generation facilities.

Turbine Hall Lube-Oil Drainage

Capture hydrocarbons and prevent solids-induced sinking of oil layers.

Large storage tanks and piping illustrating hydrocarbon runoff control in fuel-handling areas.

Coal Pile & Yard Runoff

Handle stormwater loaded with fines and sheens before NPDES discharge.

Cooling towers and piping illustrating oily water treatment in natural gas power generation facilities.

Ash Handling & Bottom Ash Areas

Manage high-solids drainage with automated purge control.

Sludge accumulation in separator tank illustrating solids removal challenges in natural gas plants.

Fuel-Oil Backup Systems & Boiler Room Drainage

Remove #2 fuel-oil, lube-oil, and mixed solids under varying loads.

Below-ground Mercer oil-water separator module in a stormwater sump, managing first-flush loads and hydrocarbon runoff.

Cooling & Condenser Water Sumps

Prevent oil carryover caused by variability in temperature, flow, and particulate.

Black piping manifold beside a blue separator skid with rail cars in the background

Performance Highlights

MERCER ADVANTAGE

The Mercer Difference

Engineered for Coal’s Toughest Real-World Conditions

Many separators fail when exposed to coal fines. Mercer designs specifically to tolerate abrasive particulate without performance collapse.

Emission Containment Built-In

Sealed, gasketed lids eliminate vapor seepage and prevent coal dust contamination.

Superior Separation vs. CPI Tanks

CPI and simple gravity systems with slotted skim pipes foul immediately in coal environments. Mercer maintains rise paths and stable hydraulics.

Automated, Safer, Cleaner Operations

No confined-space pit digging, no hand-skimmed trenches, no unpredictable CPI failures.

Predictable Compliance & Reporting

Consistent performance supports NPDES monitoring, sheen control, and environmental audits.

Lower Operating Costs

Fewer cleanouts, longer intervals between maintenance, reduced disposal volumes.

Covered separator tank top with vibratory motors and yellow railings at a coal facility Pair of tiered white separator units installed outside a brick powerhouse Large rectangular oil water separator with steel cover plates and access walkway at a coal plant

Modernize Your Coal Plant’s Oily-Water Treatment

Automated, predictable, solids-tolerant performance for coal handling and powerhouse operations.

Request a Coal Applications Consultation

Frequently Asked Questions

Q.

Can Mercer handle coal fines without media blinding?

A.

Yes. Controlled-flow geometry and purge systems prevent fouling and maintain upward rise paths.

Q.

 Do Mercer units tolerate ash and abrasive solids?

A.

Absolutely — abrasion-resistant coatings and hopper-bottom solids management are designed for these conditions.

Q.

Can the system integrate with plant controls?

A.

Yes. SCADA/PLC integration, alarms, and automated valve actuation are standard options.

Q.

How often is maintenance required?

A.

Usually every 6–12 months — significantly less than weekly CPI cleaning cycles.

Q.

Can Mercer retrofit into existing concrete pits?

A.

Often yes. Multi-Pack™ modules can upgrade performance without major civil work.

Q.

Are sealed covers necessary in coal plants?

A.

Yes — they prevent dust contamination, stabilize hydraulics, and reduce vapor and odor exposure.